Scan
18
English
SCAN
ADDING A DELETED NUISANCE
CHANNEL BACK TO THE SCAN
LIST
1. Press the
Scan
key to stop the scan operation.
2. Press the
Scan
key again to re-start the scan
operation.
SCAN CHANNEL DISCOVERY
ALERT
Sometimes you need to know which channel the
radio has switched to during a scan operation.
The Scan Channel Discovery Alert gives you
this information.
This feature gives you audio feedback, after you
have stopped a scan operation, when you
change to the last channel that was switched to
by the scan operation.
1. Stop the scan operation.
2. Turn the
Channel Selector
to change the chan-
nels.
3. When you reach the last channel the scan oper-
ation switched to, the radio will give an alert
tone.
SCAN LIST MEMBER PRIORITY
A channel in your scan list may be prioritized
(check with your dealer for details). In such a
case, the radio will check that prioritized
channel more frequently than the other non-
prioritized channels.
Note:
Even though your radio has
switched to a non-priority
channel, your radio will still
check for activity on the prior-
ity channel. If some activity is
detected there, the radio will
switch to that priority channel.
#WarisPopUser.book Page 18 27, May 1998, 2:06 PM
To Next Page
Loading...
Need help?
General
