22 Camera
4. Camera
4.1 Connecting the Camera to Power
• Insert the small end of the Power Adapter into the Power Adapter Connector
and plug the Power Adapter into a power socket.
• Slide the ON/OFF switch to ON, the blue Power LED will light up. (Note: To
switch the device off, slide the ON/OFF switch to OFF.)
4.2 Camera Functions:
Working with Android™ devices
• Run the Hubble App on your Android™ device.
• The Camera view appears on the screen.
4.2.1 Add more Cameras
• On Camera view, tap on the Hubble logo to go to the Add Camera page.
(Picture A13)
• Tap on Add Camera to add one more Camera by following steps for
Android™ device setup in section 3.2.4. (Picture A14)
To Next Page
Loading...
Need help?
General
