Motorola RAZR V3m User Manual

10
essentials
install the battery
charge the battery
New batteries are shipped partially charged.
Before you can use your phone, you need to
install and charge the battery as described
below. Some batteries perform best after
several full charge/discharge cycles.
Note: When the battery is charging, the
phone automatically changes to the audible
Master Volume setting, regardless of which
ringstyle you have set. The phone changes
back to your selected ringstyle when you
disconnect the charger.
To charge using the charger:
1
Insert the
charger into the
USB connector
on your phone
as shown.
2 Plug the other
end of the
charger into the appropriate electrical
outlet.
The battery indicator
N flashes while
your phone is charging.
3 When your phone indicates Charge Complete
and the battery indicator stops flashing,
remove the charger.
1.
2.
3.
4.

Motorola RAZR V3m Specifications

General

Brand	Motorola
Model	RAZR V3m
Category	Cell Phone
Language	English