Motorola T6 Series User Manual

28 Advanced settings
8. Advanced settings
8.1 Call list type
You can set the Call list to show All calls or Missed calls only. If All calls is
selected, press i key in idle and you can view all calls lists. If Missed calls is
selected, press i key in idle and you can view missed calls only.
1. Press M, scroll d to Advanced set and press M.
2. The display shows Call list type , press M .
3. Scroll i or d to select All calls or Missed calls and press M to confirm.
8.2 Area code
The area code must be 3 digits long.
1. Press M, scroll d to Advanced set and press M.
2. Scroll d to Area code is displayed. Press M.
3. Using the keypad enter the area code and press M to confirm.
8.3 Auto prefix
You can set the phone to detect a dialling number and replace it with another
number. The number to be detected can be up to 5 digits long. It can be
replaced with a number up to 10 digits.
1. Press M, scroll d to Advanced set and press M.
2. Scroll d to Auto prefix , press M.
3. Detect digit is displayed. Press M.
4. Enter the number you want to be detected and press M.
5. The display shows Prefix , press M.
6. Enter the number you want it replaced with.
7. Press M to confirm or n to return to standby.
8.4 Flash time
Depending on your country and network operator, your phone has the flash
time set as long. It is unlikely that you need to change this setting unless
advised to do so.
1. Press M, scroll d to Advanced set and press M.
2. Scroll d to Flash time and press M.
3. Press i or d to select 80ms, 90ms, 100ms, 110ms, 160ms, 200ms, 250ms, 300ms,
400ms, 600ms, 700ms or 900ms and press M to confirm.

Motorola T6 Series Specifications

General

Brand	Motorola
Model	T6 Series
Category	Cordless Telephone
Language	English