English
27
GETTING STARTED
HANDS-FREE USE/VOX
Motorola XT Series radios can operate
hands-free (VOX) when used with compatible
VOX accessories.
With Compatible VOX Accessories
The default factory setting for VOX sensitivity
level is Medium (‘2’). Before using VOX, use
the Customer Programming Software (CPS) to
set the VOX sensitivity level to a different level
from ‘2’. Then, perform the following steps:
1. Turn the radio OFF.
2. Open accessory cover.
3. Insert the audio accessory’s plug firmly into
accessory port.
4. Turn radio ON. The LED Indicator will blink
double red
5. Lower radio volume BEFORE placing
accessory near ear.
6. To transmit, speak into accessory microphone
and to receive, stop talking.
7. VOX can be temporarily disabled by pressing
the PTT button or by removing the audio
accessory.
VOX can also be activated using the
(Menu) button without using the CPS.
Note: To order accessories, contact your Motorola
point of purchase
Setting iVOX Sensitivity
The sensitivity of the radio's accessory or
microphone can be adjusted to suit different
operating environments. iVOX sensitivity can
be programmed via the CPS or the
(Menu) button.
VOX
Accessory
Accessory Port/
Connector
To Next Page
Loading...
Need help?
General
