3 Product description
16 BA5831400-00 EN
This chapter contains an overview of the design and function of the product.
3.1 Scope of delivery
The product is packaged with protection against moisture and is delivered as
follows:
▪ Pointer thermometer with temperature sensor
▪ Technical documents
Optional:
▪ 4...20mA analog output
▪ M25x1.5 STD (brass), WADI (brass or stainless steel) or offshore (stain-
less steel) cable gland
▪ 1/2" 14NPT adapters
▪ 3/4" 14NPT adapters
▪ ANSI or M plug connector
▪ Step protection (only in combination with sensor No. 6 VA and sensor No.
7)
Please note the following:
▪ Check the shipment against the shipping documents for completeness
▪ Store the parts in a dry place until installation
▪ The product must remain in the packaging and may only be removed im-
mediately before installation
3.2 Function description
The pointer thermometer measures the oil temperature or determines the
winding temperature in power transformers, distribution transformers or reac-
tors, depending on the version. The sensor of the pointer thermometer is lo-