Device Selection
Here you can select a audio output source to change the related options. The “check”
sign indicates the devices as default.
Volume Adjustment
You can control the volume or balance the right/left side of the speakers that you
plugged in front or rear panel by adjust the bar.
Application Enhancement
for both output and input device.
Jack status panel
This panel depicts all render and capture devices currently connected with your
computer.
Auto popup dialog
When you plug into the device at the jack, a dialogue window will pop up asking you
which device is current connected.
As you know, each jack corresponds to its default setting, you can refer to the next
section “Hardware Default Setting”.
To Next Page
Loading...
Need help?
General
