To Next Page

To Previous Page

RAID Conﬁguration

Change the Staggered Spinup Count

Depending on a system’s power supply load-rating, you might want to limit the

number of disks that are spun-up together when a system is powered on.

1. At the Controller Options submenu, use the arrow keys to highlight Set Staggered

Spinup Count and press Enter. The number within the brackets changes colour to

indicate it is selected.

2. Use the arrow keys to change the number within the brackets. The minimum is 1

and the maximum is 8.

3. Press Enter to save the setting.

Questions and Answers:

Need help?

Do you have a question about the MSI B450 GAMING PLUS and is the answer not in the manual?

MSI B450 GAMING PLUS Specifications

General