4-10
BIOS Setup
Security Menu
Supervisor Password / User Password
When this item is selected, a message box shall appear on the screen as
below:
Type a maximum of twenty-digit password and press [Enter]. The
password typed now will replace any previously set password from CMOS
memory. You may also press [ESC] to abandon new password setting.
When the Supervisor Password is set, new items User Password
and
Password Check
will be added in the menu.
Select User Password
to give or to abandon password.
Note that Supervisor Password field allows users to enter and change the
settings of the BIOS SETUP UTILITY, while User Password field only
allows users to enter the BIOS SETUP UTILITY without having the
authorization to make any change.
Enter New Password
To Next Page
Loading...
Need help?
General
