B-19
nVidia RAID
3 Connect the RAID disk that you want to use with any given RAID array.
4 Click Next and the following screen shot will appear:
5 Click Finish.
Initializing a RAID Array
Initializing a RAID array erases all the data that is stored on that array, and writes all
zeros to the disks. Initialization of newly configured RAID arrays is recommended to
ensure consistency and reliable performance on any supported fault tolerant array
such asRAID 0. Use this feature only if you are absolutely sure that you want to wipe
out all the data on that array.
Initialization of a fault tolerant array can only be done when the array is being
created. To initialize an array, perform the following steps:
Note: In this example, a mirror array is initialized.
1 From the NVRAIDMAN window, right click on any available free disk and select
Create Array as show in Figure below.
To Next Page
Loading...
Need help?
General
