52
BIOS Setup
▶Chassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a
warning message.
[Reset] Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled] Disables this funcion.
Save & Exit
▶Discard Changes and Exit
Exit BIOS setup without saving any change.
▶Save Changes and Reboot
Save all changes and reboot the system.
▶Save Changes
Save current changes.
▶Discard Changes
Discard all changes and restore to the previous values.
▶Restore Defaults
Restore or load all default values.
▶Boot Override
The installed bootable devices will appear on this menu, you can select one of them to
be the boot device.
To Next Page
Loading...
Need help?
General
