To Next Page

To Previous Page

RAID Conﬁguration

Important

You will lose all data on the RAID drives and any internal RAID structures when you

perform this operation.

Possible reasons to Reset Disks to Non-RAID could include issues such as

incompatible RAID configurations or a failed volume or failed disk.

Recovery Volume Options

Select option Recovery Volume Options from the main menu screen and press Enter

to change recovery volume mode. The following screen appears:

[ ]

RECOVERY VOLUME OPTIONS

[ ]

HELP

Enable Only Recovery Disk - enables recovery disk if available and

disables master disk.

Enable Only Master Disk - enables master disk if available and

disables recovery disk.

Actions will result in change from Continuous Update mode to On-Request.

[ ↑↓] - select [ESC] - Previous Menu [ENTER] - Select

1. Enable Only Recovery Disk

2. Enable Only Master Disk

Recovery mode will change from Continuous Update to On-Request after you enable

Only Recovery Disk or Only Master Disk.

Degraded RAID Array

A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard

drive members fails or is temporarily disconnected, and data mirroring is lost. As a

result, the system can only utilize the remaining functional hard drive member. To

re-establish data mirroring and restore data redundancy, refer to the procedure below

that corresponds to the current situation.

RAID Volumes

ID Name Level Strip Size Status Bootable

0 Volume0 RAID 1(Mirror) N/A XXX.XGB Degraded Yes

Physical Disks:

Port Device Model Serial # Size Type/Status(Vol ID)

1 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Disk (0)

2 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Disk (0)

Press <CTRL-I> to enter Conguration Utility..

Missing Hard Drive Member

1. Power off.

Other manuals for MSI Z370-A PRO

Questions and Answers:

Need help?

Do you have a question about the MSI Z370-A PRO and is the answer not in the manual?

General

ECC	No
Non-ECC	Yes
Memory channels	Dual-channel
Memory slots type	DIMM
Number of memory slots	4
Supported memory types	DDR4-SDRAM
Maximum internal memory	64 GB
Supported memory clock speeds	2133, 4000 MHz
RAID levels	0, 1, 5, 10
Supported storage drive types	HDD & SSD
Supported storage drive interfaces	M.2, SATA III
Audio chip	Realtek ALC892
Cooling type	Passive
Component for	PC
Motherboard chipset	-
PC health monitoring	CPU, FAN, Power supply, Temperature, Voltage
Audio output channels	7.1 channels
Motherboard form factor	ATX
Motherboard chipset family	Intel
Parallel processing technology support	2-Way CrossFireX
Processor socket	LGA 1151 (Socket H4)
Compatible processor series	Intel Celeron, Intel Pentium
Maximum number of SMP processors	1
Number of SATA connectors	6
Number of Parallel ATA connectors	0
USB 3.2 Gen 1 (3.1 Gen 1) connectors	2
BIOS type	UEFI
LAN controller	Realtek RTL8111H
Ethernet interface type	Gigabit Ethernet
Cables included	SATA
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.