To Next Page

To Previous Page

Subject to modications

9. IMPLEMENT HITCHING

This operation must be carried out by the driver, who must leave the seat and ensure

all manoeuvres are forbidden while he is working on the loader.

— Make sure that the locking pins are in hitching position (1).

The springs are compressed.

PLEASE NOTE: make sure that the implement’s hoses

are well clear of the hitching area.

— Approach the loader in line with the implement.

— Fit the implement carrier onto the implement.

— Crowd and continue to advance until the locking pins

are engaged.

— Stop the engine.

— Decompress the hydraulic lines supplying the implement.

NOTE: if the loader is equipped with a solenoid valve,

switch on the ignition and press the control button.

Questions and Answers:

Need help?

Do you have a question about the MX A104 and is the answer not in the manual?

MX A104 Specifications

General