mycom K Series User Manual

2200Q2JE-HO-KHM-N_2015.02.
Important Information
Ammonia Semi-hermetic Motor with K-series Compressor
v
About this Manual
 This product is subject to continuous development and improvement without prior notice.
Accordingly, the details provided in this manual may partly differ from the actual condition. If
any problem is found during work, please contact one of our sales or service establishments.
For each sight of MAYEKAWA, refer to following URL.
http://www.mayekawa.com/about/network/
 This manual is in English. If any other language is required, it is the customers responsibility
to prepare a manual for safety education and operation instructions.
 MAYEKAWA owns the copyright of this manual. Any part of relevant drawings and technical
documents, including this manual, may not be copied in any possible way, including the use of
electronic media, without written consent of MAYEKAWA.
 The pictures and illustrations in this manual may not accurately represent the actual condition
of the product.
 In case this manual is lost or damaged, please promptly place an order for the copy to one of
our sales or service offices. The use of this product without this manual can be a cause of
possible accidents.
 When you sell this product, be sure to transfer this manual to the next owner.
Structure of this Manual
Chapter/Section Title Description
Introduction Describes the outline and usage of this manual.
Warranty and Disclaimer The scope of warranty by the Company is described.
Provides disclaimer of warranty for the issues outside the scope of
warranty.
Important Notice Provides important information on the product as well as on this
manual.
1. Safety Safety information for the operator, safety measures used for this
product, and work safety management required in using this product
are described.
2. Product Specifications and
Structure
Specifications and structure of this product are described.
Sectional view and Parts configuration table of Motor section are
provided.
3. Installation The installation procedures for this product are described.
4. Operation of Compressor
and System
Refer to the "Reciprocating Compressor K-series Instruction Manual"
for the information in this Chapter.
5. Maintenance and Inspection Inspection points, inspection interval, and disassembly/assembly
procedures for the motor section of this product are described.

mycom K Series Specifications

General

Brand	mycom
Model	K Series
Category	Engine
Language	English