16 GEM-TOUCH K Style Keypad Operating Guide
FU NC TI ON M ENU
The keypad can provide access to a wide assortment of utility functions. The functions are displayed in a prompting
"YES/NO" format.
1. To enter the Function Menu, tap Menu.
• In high-security installations, a valid User Code must first be entered. Tap/hold-down Menu and enter your
User Code.
2. Tap Up or Down to scroll through the functions. Notice how each function is highlighted as you scroll.
3. To select and execute a highlighted function, answer "yes" by tapping Enter.
• To return to normal keypad operation, tap Exit. The keypad will automatically return to its normal operating
mode if no activity is detected for longer than one minute.
Activate Bell Test?
Activates the alarm sounder (while disarmed) for about 2 seconds and performs
a battery test. If the alarm does not sound, call for service.
• If the battery is low, a "E02-00" will appear in the display indicating a low
battery condition. Allow 24 hours for the battery to recharge. If the trouble
continues, call for service.
Display Zone Directory?
Displays a listing of all zones in the Area. Tap the Prior and Next buttons (as
displayed on-screen) to scroll the zone directory names.
Activate Chime?
The Chime Mode will sound a tone at the keypad when the programmed zone is
faulted while disarmed. To deactivate the Chime Mode, re-enter the Function
D I S P L A Y Z N D I R E C T O R Y Y/N
A C T I V A T E B E L L T E S T Y/N
A C T I V A T E C H I M E Y/N
To Next Page
Loading...
Need help?
General
