NI 5761R User Guide and Specifications 2 ni.com
Front Panel and Connector Pinouts
Front Panel
Table 1 shows the front panel connector and signal descriptions for the NI 5761. Refer to the
Specifications section of this document for additional signal information.
Caution To avoid permanent damage to the NI 5761, disconnect all signals connected to the NI 5761
before powering down the module, and only connect signals after the adapter module has been
powered on by the NI FlexRIO FPGA module.
Table 1. NI 5761 Front Panel Connectors
Device Front Panel Connector Signal Description
AUX I/O
Refer to Table 2 for the signal names and descriptions.
D<0..3>
LEDs for custom configuration.
CLK IN
Provides the NI 5761 with an external Sample clock or
Reference clock.
TRIG
Trigger input channel.
CH 0
Analog input channels <0..3>.
CH 1
CH 2
CH 3
NI 5761NI 5761
250 MS/s
Analog Input
D0 D1
D2 D3
CLK IN
TRIG CH 0 CH 1 CH 2 CH 3
AUX I/O
To Next Page
Loading...
Need help?
General
