NI Digital Waveform Generator/Analyzer Guide 6 ni.com
Note NI-HSDIO 1.5 and later also includes NI LabVIEW
SignalExpress LE, an interactive software environment that allows
you to choose from the included NI-HSDIO express steps to
quickly program common applications, including acquisition,
generation, and hardware comparison (real-time hardware
comparison is supported only on NI 655x devices).
To install NI-HSDIO, complete the following steps:
1. Insert the first CD of the NI-HSDIO CD set. The NI-HSDIO installer
should open automatically. If not, select Start»Run, and enter
x
:\setup.exe, where
x
is the letter of the CD drive.
2. Follow the instructions in the installation prompts. For troubleshooting
and operating system-specific instructions, refer to the Hardware
Installation/Configuration Troubleshooter at
ni.com/support/
install
.
(Windows Vista) Users may see access and security messages during
installation. Accept the prompts to complete the installation.
3. When the installer completes, a dialog box appears that asks if you want
to restart, shut down, or restart later. Select Restart.
4. If you are using a system running the LabVIEW Real-Time Module,
download NI-HSDIO to the target using MAX. Refer to the MAX Remote
Systems Help by selecting Help»Help Topics»Remote Systems
in MAX.
NI Script Editor
The NI Script Editor is included on the NI-HSDIO CDs and is installed when
you install the driver. The NI Script Editor provides an intuitive interface to
help you develop linking and looping waveform generation operations.
NI Script Editor Help contains more information about the NI Script Editor.
You can access NI Script Editor Help by launching the NI Script Editor and
selecting Help»NI Script Editor Help from the toolbar.
(Optional) Install the NI Digital Waveform Editor
The NI Digital Waveform Editor (DWE) is included with the higher-memory
versions of NI digital waveform generator/analyzers and also can be
purchased separately at
ni.com. The NI DWE allows you to easily import
data from popular third-party electronic design automation (EDA) programs,
create your own waveforms, edit these waveforms, and view acquired
waveforms.
If you are using the NI DWE, install it after you install NI-HSDIO.
To Next Page
Loading...
Need help?
General
