About This Manual
PCI E Series RLPM xiv
©
National Instruments Corporation
Organization of This Manual
The PCI E Series Register-Level Programmer Manual is organized as
follows:
• Chapter 1, General Description, describes the general characteristics
of the PCI E Series boards.
• Chapter 2, Theory of Operation, contains a functional overview of the
PCI E Series boards and explains the operation of each functional unit
making up the PCI E Series boards.
• Chapter 3, Register Map and Descriptions, describes in detail the
address and function of each of the PCI E Series control and status
registers.
• Chapter 4, Programming, contains programming instructions for
operating the circuitry on the PCI E Series boards.
• Chapter 5, Calibration, explains how to calibrate the analog input and
output sections of the PCI E Series boards by reading calibration
constants from the EEPROM and writing them to the calibration
DACs.
• Appendix A, Customer Communication, contains forms you can use to
request help from National Instruments or to comment on our products
and manuals.
• The Glossary contains an alphabetical list and description of terms
used in this manual, including abbreviations, acronyms, metric
prefixes, mnemonics, and symbols.
• The Index contains an alphabetical list of key terms and topics in this
manual, including the page where you can find each one.
Conventions Used in This Manual
The following conventions are used in this manual:
<> Angle brackets containing numbers separated by an ellipsis represent a
range of values associated with a bit or signal name—for example,
DBIO<3..0>.
This icon to the left of bold italicized text denotes a note, which alerts you
to important information.
To Next Page
Loading...
Need help?
General
