National Instruments PXI-4130 User Manual

NI PXI-4130 Calibration Procedure | © National Instruments | 3
Related Documentation
Consult the following documents for information about the NI 4130, NI-DCPower, and your
application software. All documents install with the software and are available at
ni.com/
manuals
.
Password
The default calibration password is NI.
Calibration Interval
National Instruments recommends that you perform a complete calibration for the NI 4130 at
least once a year. You can shorten this calibration interval based on the accuracy demands
of your application. Refer to Where to Go for Support for more information.
NI DC Power Supplies and SMUs Getting Started Guide
Contains instructions for NI-DCPower installation, hardware installation, and
hardware programming.
NI PXI-4130 Specifications
Contains NI PXI-4130 specifications and calibration interval.
NI-DCPower Readme
Contains operating system and application software support in NI-DCPower.
NI DC Power Supplies and SMUs Help
Contains detailed information about the NI PXI-4130.
LabVIEW Help
Contains LabVIEW programming concepts and reference information about
NI-DCPower VIs and functions.
NI-DCPower C Reference Help
Contains reference information for NI-DCPower C functions and NI-DCPower
C properties.

National Instruments PXI-4130 Specifications

General

Brand	National Instruments
Model	PXI-4130
Category	Measuring Instruments
Language	English