National Instruments USB-6002 User Manual

2 | ni.com | NI USB-6001/6002/6003 User Guide
Figure 1. NI USB-6001/6002/6003 Top and Side Views
Safety Guidelines
Operate the NI DAQ device only as described in this document.
Caution Refer to the NI USB-6001/6002/6003 Safety, Environmental, and
Regulatory Information document included with your kit for important safety and
electromagnetic compatibility information. To obtain a copy of this document online,
visit
ni.com/manuals and search for the document title.
Caution Do not operate the device in a manner not specified in this document.
Misuse of the device can result in a hazard. You can compromise the safety protection
built into the device if the device is damaged in any way. If the device is damaged,
contact National Instruments for repair.
Caution Do not substitute parts or modify the device except as described in this
document. Use the device only with the chassis, modules, accessories, and cables
specified in the installation instructions.
Caution Do not operate the device in an explosive atmosphere or where there may
be flammable gases or fumes. If you must operate the device in such an environment,
it must be in a suitably rated enclosure.
Caution You must have all covers and filler panels installed during operation of the
device. Do not operate the device without verifying that the cover is correctly
attached and the device is completely closed.
1 Screw Terminal Connector Plug 2 LED Indicator 3 Micro-B USB Connector
2 3
1

National Instruments USB-6002 Specifications

General

Brand	National Instruments
Model	USB-6002
Category	I/O Systems
Language	English