KONTAKT PLAYER Getting Started – 6
1 Welcome to KONTAKT PLAYER!
Thank you for installing KONTAKT PLAYER. This document will get you up and running with
your KONTAKT PLAYER-compatible libraries and instruments powered by KONTAKT.
KONTAKT is one of the leading sampling solutions in the audio industry. KONTAKT 4 actually
includes KONTAKT PLAYER by way of Library Browser integration and intelligent handling.
They are not two separate applications. So, whenever we refer to KONTAKT in this document,
you can be sure the function addressed is also feature of KONTAKT PLAYER. Furthermore,
KONTAKT PLAYER can load all of your INTAKT, KOMPAKT and KONTAKT PLAYER 1 librar-
ies, thus enabling you to use these libraries on Intel-based Macs.
1.1 About this Getting Started Guide
The purpose of this Getting Started document is to guide you through the basic steps of
setting up KONTAKT PLAYER and to get you acquainted with the fundamental aspects of
its user interface. After reading it, you should be able to start KONTAKT PLAYER both in
stand-alone mode and as a plug-in in your sequencer, nd, load and play sounds, and know
your way around the user interface. Because of this, we recommend that you take the time
to read this guide in its entirety.
1.2 System Requirements
In order to run KONTAKT PLAYER without problems, your computer and operating system
should at least fulll the minimum specications listed below.
SPRACHE IN Paragraph-Style “05 - STANDARD Fließtext” passend einstellen
To Next Page
Loading...
Need help?
General
