Native Instruments KONTAKT PLAYER User Manual

KONTAKT PLAYER Getting Started – 23
• The load… command, which you can nd in the Files Menu of the Main Control panel,
will open a traditional le selector dialog that you should nd familiar from other applica-
tions:
load… command of the Files menu.
We’ll limit the scope of this section to the second option: The Libraries tabs of the Browser.
In order to nd out more about the other tools mentioned, refer to the KONTAKT 4 Reference
Manual.
4.1.1 Loading an Instrument Using the Libraries Tab
Let’s start by loading an Instrument! In this example we will use an Instrument from the
Factory Selection Library. The following description applies to all libraries in a very similar
manner, so you can use another library if desired.
1. Make sure the Browser is visible on the left side of the main window. If it’s not, click on
the button labeled Browse in the Main Control panel:
Toggle the visibility of the Browser with the Browse button in the Main Control panel.
2. The Library Browser provides access to all KONTAKT PLAYER libraries in-
stalled on your computer. To show the Library Browser, click the Libraries tab.
KONTAKT PLAYER now displays all libraries as “boxes” in the Library Browser:

Native Instruments KONTAKT PLAYER Specifications

General

Brand	Native Instruments
Model	KONTAKT PLAYER
Category	Recording Equipment
Language	English