Native Instruments Scarbee MM-Bass User Manual

Scarbee MM-Bass – 32
10.5 Pickup Hit
For every note you play the script decides whether a pickup-hit noise should be played or
not. Here you can set the chance for it to happen. At 0% you never get a pickup hit and at
100% you always get it.
The default mode determines whether pickup-hit noises should be enabled by default. It can
be either of:
• Pickup hits: noises are ON by default. Hold the F0 key switch to turn them off.
• No pickup hits: noises are OFF by default. Hold the F0 key switch to turn them on.
Please note that the default release mode and pickup are coupled, i.e. if you select “Pickup
hits” as your default mode the release mode will be set to Random.
When you load MM-Bass the pickup hit knob is set to 0%, so if you want pickup hits you need
to increase it. It can also be automated using CC#4 (or some other controller of your choice).

Native Instruments Scarbee MM-Bass Specifications

General

Brand	Native Instruments
Model	Scarbee MM-Bass
Category	Software
Language	English