Missed DSC call
Low Battery (vessel) warning (activates at 10.5 V)
Battery level (wireless handset)
Track your Buddy feature is active
TRI watch or DUAL scan is active
GPS simulator is active
LCD functions
A Radio is Transmitting (TX) mode. Will change to BUSY when receiving
B Missed call in the DSC call log
C Channel is set to high power transmit
D Low vessel voltage alert
E Weather alert function is enabled (USA models)
F Sensitivity mode is set to LOCAL
G AIS receiver is enabled (NRS-2 only)
H Internal GPS is enabled, with 3D fix
I DSC functionality is enabled, but auto-switch is OFF
J The USA channel bank is active
K MOB waypoint is active
L Current channel saved in ‘My Channels’
M Channel number (2 or 4 digits)
N Channel name
O Current channel will be skipped during a scan
P Squelch level indicator (greyed out means control is not active)
Q Longitude
R Latitude
S GPS Manual mode is active
T Current channel is a Duplex channel
U Current channel is set as the Weather channel (use Wx key to select)
V Time (derived from GPS)
W UTC offset is applied
X Volume is under active control (solid black indicates control is active)
Y Current channel is set as the Watch channel (use TRI key to select)
Z Volume level indicator
AA Track your buddy is enabled
AB Handset ID and Name
14 |
General information | RS100 / RS100-B / V100 / V100-B User Manual
To Next Page
Loading...
Need help?
General
