EasyManuals Logo
Home>NEC>Monitor>MultiSync E273F

NEC MultiSync E273F User Manual

NEC MultiSync E273F
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
English−15
English

Video Input Connections
HDMI – High denition digital video and audio signal connection to a computer, streaming media player, Blu-ray player,
game console, etc.
DisplayPort – High denition digital video and audio signal connection to a computer.
USB-C – Supports DisplayPort input of high denition digital video and audio signal (DisplayPort Alt Mode on USB Type-C
only) connection to a computer. This display does not support other USB Type-C Alt Modes such as MHL and HDMI.
This port is not for use with USB devices such as mice, keyboards, or storage media.
Connecting Video
The type of video connections that can be used to connect to a computer depends on the computers display adapter.
The following table shows the typical factory preset signal timing for each connection type. Some display cards may not be able
to support the required resolution for proper image reproduction with the selected connection. The monitor will show the proper
image by automatically adjusting the factory preset timing signal.
<Major supported timings>

  
V
640 x 480 60/72/75 Hz p
720 x 400 70 Hz p
720 x 480 60 Hz p
720 x 576 50 Hz p
800 x 600 56/60/72/75 Hz p SVGA
1024 x 768 60/70/75 Hz p XGA
1280 x 720 50/60 Hz p 720p
1280 x 960 60/75 Hz p
1280 x 1024 60/75 Hz p SXGA
1440 x 900 60 Hz p
1680 x 1050 60 Hz p
1920 x 1080 50/60 Hz p 1080p, Recommended (60 Hz)
p: Progressive.
 When the selected monitor resolution is not a native panel resolution, the text contents appearance in the monitor
screen is expanded in a horizontal or vertical direction to show the non-native resolution to full screen. This expansion
is done by interpolated resolution technologies, which are normal and widely used in at panel devices.
Connecting to a Computer with HDMI
Please use an HDMI cable with the HDMI logo.
It may take a moment for the signal to appear after turning on the computer.
Some display cards or drivers may not display an image correctly.
If the monitors power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this
case, please turn off the computer then turn it on again.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync E273F and is the answer not in the manual?

NEC MultiSync E273F Specifications

General IconGeneral
BrandNEC
ModelMultiSync E273F
CategoryMonitor
LanguageEnglish

Related product manuals