English-14
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
as follows:
1 Ambient Light Sensor
Human Sensor
Detects the level of ambient lighting and the presence of a user, allowing the monitor to
make adjustments to various settings resulting in a more comfortable viewing experience.
Do not cover this sensor.
2 INPUT/SELECT Changes the input source when not in the OSD menu. Enters sub menus when in the OSD
menu. You can directly change to L/B (LOW BLUE LIGHT) mode by touching the INPUT key
for 3 seconds or more.
3 MENU/EXIT Opens the OSD menu. Exits the OSD sub menus and main menu.
4 LEFT/RIGHT/
UP/DOWN*
2
Navigates through the OSD menu.
When the OSD menu is off, touch one of the following keys to open the menu for the function
indicated:*
1
UP key: BRIGHTNESS
DOWN key: VOLUME
RIGHT key: USB SELECTION
5
/RESET When the OSD menu is displayed on the screen, this button works as a reset command for
the OSD settings.
When the OSD menu is not displayed on the screen, this button works as a select function for
the MULTI PICTURE settings.*
3
You can swap pictures between a main screen and a sub screen by touching the
/RESET
key for 3 seconds or more while Main or Sub is set in MULTI PICTURE.*
1,
*
4
6 Power Turns the monitor on and off.
7 Power LED Indicates that the power is on or off.
*
1
When the Hot Key function is OFF, this function is disabled.
*
2
Depending on the OSD ROTATION setting, LEFT, RIGHT, UP and DOWN key guides are displayed at the
, , , keys
differently (See
page 20).
*
3
MULTI PICTURE menu.
Touch the LEFT/RIGHT to select a priority (adjustable) screen. When MULTI PICTURE is OFF, a single screen will be
displayed.
*
4
Swapping of picture by picture is not supported. The sound keeps the value of SOUND INPUT setting.
The expansion keeps the values of EXPANSION setting of each input.
To Next Page
Loading...
Need help?
General