English-35
English
Using the Zoom function
Allows you to use the entire screen area, significantly expanding the size.
Allows the picture displayed in the center to expand.
NOTE: When LEFT or RIGHT is set at MULTI PICTURE, the other picture is expanded or reduced automatically.
SETUP
1. Select FULL or ASPECT in EXPANSION to activate the Zoom function (see
page 17).
EXPANSION OFF
2. Set a resolution via H.RESOLUTION or V.RESOLUTION (see page 16).
Vertical expanding Horizontalexpanding
3. The image position can be moved from the center to left or right by selecting LEFT/RIGHT and upward or downward by
selecting UP/DOWN (see
page 16).
Move left or right Move upward or downward
NOTE: When showing 2 screens, the input resolution of the main (adjustable) image is prioritized.
A. The right image is set to be the main one.
In this case, the priority image is set to be on the right side with black area shown. The input resolution for the image on the
left side is decreased.
To Next Page
Loading...
Need help?
General