NEC MultiSync LCD4020 User Manual

English-9
English
Terminal Panel
9
AUDIO OUT*
To output the audio signal from the AUDIO IN 1, 2, 3, HDMI, and
TV jack to an external device (stereo receiver, amplifier, etc.).
10
VIDEO INPUT/OUTPUT Connector*
VIDEO IN connector (BNC and RCA): To input a
composite video signal. BNC and RCA connectors are not
available at the same time (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from the VIDEO IN connector.
S-VIDEO IN connector (Mini DIN 4 pin): To input the
S-video (Y/C separate signal). See page 28, S-VIDEO
MODE SETTING.
11
EXTERNAL CONTROL (D-Sub 9 pin)
IN connector: Connect RS-232C input from external
equipment such as a PC in order to control RS-232C
functions.
Out connector: Connect RS-232C output. To connect
multiple MultiSync monitors via RS-232C daisy Chain.
12
EXTERNAL SPEAKER TERMINAL*
To output the audio signal from AUDIO 1, 2, 3, HDMI and
TV jack.
Note: This speaker terminal is for 15W + 15W (8 ohm)
speaker.
13
RF IN* (For U.S.)
TV signal input.
14
S/PDIF OUTPUT* (For U.S.)
Optical digital audio out.
15
Antenna Input* (For Europe)
Connects to antenna or to TV signal.
*: The product you purchased may not have this feature.
1
AC IN connector
Connects with the supplied power cord.
2
DVI IN (DVI-D)
To input digital RGB signals from a computer or HDTV
device having a digital RGB output.
* This connector does not support analog input.
3
VGA IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or
from other RGB equipment.
4
RGB/HV IN [R, G, B, H, V] (BNC)
To input analog RGB signals or signals from other RGB
equipment.
This is also to connect equipment such as a DVD player,
HDTV device and Set-Top-Box. A Sync-on-Green signal can
be connected to the G connector.
5
RGB/HV OUT (BNC)
To outputs the signal from the RGB/HV IN connector to an
input on a separate device.
6
HDMI connector*
To input digital HDMI signals.
7
DVD/HD connector* (RCA)
Connecting equipment such as a DVD player, HDTV device,
or Set-Top-Box.
8
AUDIO IN* 1, 2, 3
To input audio signal from external equipment such as a
computer, VCR or DVD player.
LCD4020/LCD4620
LCD5220
In
Out

NEC MultiSync LCD4020 Specifications

General

Pixel pitch	0.648 x 0.648 mm
Response time	8 ms
Display diagonal	40 \
Display brightness	500 cd/m²
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
Display number of colors	16.78 million colors
Aspect ratio	16:9
Display sRGB	Yes
Built-in camera	No
Headphone connectivity	3.5 mm
DVI-D ports quantity	1
Product color	Black
Product design	Digital signage flat panel
Panel mounting interface	600 x 200 mm
Power consumption (typical)	300 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE; TÜV GS; C-tick; FCC Class B; UL/C-UL or CSA; CCC; PSB; VCCI; RoHS
Cables included	AC, VGA

Weight and Dimensions

Depth	140 mm
Height	532 mm
Weight	29400 g
Depth (with stand)	330 mm
Width (with stand)	920 mm
Height (with stand)	567 mm
Weight (with stand)	31100 g