UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
NWA-033632-001, Issue 1
Page 17
DID Addressing
DID Addressing
General Description
This feature allows incoming ISDN-PRI calls to terminate to stations, Attendant Console, Automated Atten-
dant, etc., based on the Called Party number. Direct Inward Dial trunks will be terminated to programmed des-
tinations without Attendant assistance.
Operating Procedure
No manual operation is required.
Station Application
Not applicable
Service Conditions
1. If the network is notified that the destination station for the DID call is busy or a connection-controlled sta-
tion, the network gives the calling station a Busy Tone. (This depends upon call forwarding services being
activated.)
2. If the called station is nonexistent, the DID call can be routed to the Attendant Console, to another desig-
nated station, or can receive Reorder Tone.
3. Refer to the Features and Specifications Manual (Business/Hotel) for more details of DID service.
To Next Page
Loading...
Need help?
General