UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
Page 20 NWA-033632-001, Issue 1
ISDN Terminal
ISDN Terminal
General Description
This feature provides the system with an ISDN Terminal or Terminal Adapter (TA). The following connections
are available:
• ISDN Terminal to ISDN Terminal
• ISDN Terminal to ISDN Trunk
• ISDN Trunk to ISDN Terminal
• ISDN Terminal to Single Line Telephone
• ISDN Terminal to Multiline Terminal
• ISDN Terminal to PS
Operating Procedure
No manual operation is required.
Service Conditions
1. The 2BRI blade are required.
2. The ISDN Terminal must be locally powered.
3. The following connections are available:
• Point-to-Point connection
• Point-to-Multipoint connection
•National ISDN 1
•AT & T
4. The following features are available. Other service features are not available with ISDN Terminal.
• Individual Terminal Calling (Point-to-Multipoint connection)
•Group Calling (Point-to-Multipoint connection)
•Called Party Recognition Service (DIT)
•DID Addressing
•DID and DOD Addressing
•CPN to Network-Present
•CPN to Terminating User-Display
• Sub Address-Present
•Direct Outward Dialing (DOD)
•Restriction from outgoing call
• Toll restriction
• Station-to-Station Calling
• Station Hunting
To Next Page
Loading...
Need help?
General