Netafim NMC-DC User Manual

NMC-DC
INSTALLATION MANUAL
Page: of 109 pagesRevision: 01 IDoc. Name: NMC-DC I Installation Manual
Crop Management Technologies
8. Controller Test Procedure
“5. Test” in Main Menu
 “1. Relays” to test output
devices in the field (dry test)
 Highlight status, press ENTER,
“MAN” appears
 To end process press ENTER
again
For Irrigation valve test,
send someone out in field
with Walky-Talky to verify
status
2
3
1
4
Output Level (A/D): ≤300 A/D
when all outputs are on.
If output level is above 300, see
Troubleshooting Appendix B
8.1 Test Relays
NOTE: In order to bring solenoid to Normally Open/Closed position either manually open
and close each output, or switch controller off and back on again for automatic positioning.
39

Netafim NMC-DC Specifications

General

Brand	Netafim
Model	NMC-DC
Category	Irrigation System
Language	English