NetComm CloudMesh Satellite NS-02 User Manual

13 of 22
CloudMesh Satellite – User Guide
UG01350 v1.00 14 July 2021
F i gure 7 – Wi-Fi Security card
Turning off the LED light
In some locations, for example a bedroom, the LED light may become an unwanted distraction.
To control the display of the CloudMesh Satellite’s LED light, press and hold the WPS button for six (6)
seconds to switch the light’s display between
ON or OFF.
F i gure 8 – Turn off LED display
Web interface
The CloudMesh Satellite features a web interface for advanced configuration, though it is not required for
everyday operation of the device.
Firmware upgrade
If a firmware update is released, you can apply it to the satellite by accessing the web interface. In situations
where your gateway and satellite were provided to you pre-configured by your Internet Service Provider, the
firmware upgrade is remotely managed by the provider.
There are two ways of accessing the web interface of the satellite. The method to use depends on whether
the CloudMesh Satellite is paired with the Gateway.

NetComm CloudMesh Satellite NS-02 Specifications

General

Brand	NetComm
Model	CloudMesh Satellite NS-02
Category	Wireless Access Point
Language	English