NetComm NTC-402 User Manual

NTC-402 – Telstra Private IP WAN Configuration Guide
8 of 11
CG01068 v. 1.0 October 2018
© NetComm Wireless 2018
8 Enter the following details in this page:
I T E M
D E S C R I P T I O N
T E L S T R A S E T T I N G S
NAT
Disable the NAT (Network Address Translation)
functionality.
 Enable
Network Monitoring
Disable the Network Monitoring functionality.
 Enable
Table 3 – Virtual Server Rule Configuration page
9 Scroll to the bottom of the Internet Setup tabbed page and click the Save button to apply the changes you
have made.
Disable SPI
10 Open Security >> Firewall and click the Options tab:
Figure 5 – Basic Networking > WAN & Uplink > Internet Setup tabbed page
11 Enter the following details in this page:
Firewall Options
I T E M
D E S C R I P T I O N
T E L S T R A S E T T I N G S
SPI
Disable the SPI (Stateful Packet Inspection, also known
as stateful firewall) functionality.
 Enable
Allow Ping from WAN
Enable so that ping tests can be performed over the
wireless IP WAN.
 Enable
Table 4 – Firewall Options

NetComm NTC-402 Specifications

General

Brand	NetComm
Model	NTC-402
Category	Wireless Router
Language	English