NetComm NTC-6200-01 User Manual

| Wireless M2M
22
RF, EN301908 UMTS RF, EN 62311 SAR Technical requirement for radio equipment. A notied
body has determined that this device has properly demonstrated that the requirements of the
directive have been met and has issued a favourable certicate of expert opinion. As such the
device will bear the notied body number 0682 after the CE mark.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality
of the product. Secondly, CE Marking is mandatory for the product it applies to whereas most
quality markings are voluntary.
Marking: The product shall bear the CE mark, the notied body
number(s) as depicted to the left. This product has also passed the
following certication standards –
Health (Article 3.1(a) of the R&TTE Directive)
EN 62311: 2008 ; EN 50385 :2002
Safety (Article 3.1(a) of the R&TTE Directive)
EN 60950-1:2006/A11:2009+A1:2010+A12:2011
Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive)
EN 301 489-1 V1.9.2, EN 301 489-3 V1.4.1, EN 301 489-7 V1.3.1
EN 301 489-17 V2.2.1 (NTC-6200-01 and NTC-6200-11)
EN 301 489-24 V1.5.1
EN 55022:2010/ AC:2011 Class B, EN55024: 2010
EN 61000-3-2:2006/A1:2009/A2:2009, EN 61000-3-3:2008
Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive)
EN 301 511 V9.0.2, EN 301 908-1 V5.2.1, EN 301 908-2 V5.2.1
EN 300 328 V1.8.1 (NTC-6200-01 and NTC-6200-11)
EN 300 440-1 V1.6.1, EN 300 440-2 V1.4.1
RoHS Directive (2011/65/EU)
EN 50581: 2012
NOTE: To comply with the RF exposure requirements, this equipment must be operated with a
minimum of 20 cm separation from the user. This is a regulatory requirement and applies
to all 3G capable devices meeting standard regulatory compliance such as the compliance
standards listed above.

NetComm NTC-6200-01 Specifications

General

Brand	NetComm
Model	NTC-6200-01
Category	Network Router
Language	English