EasyManuals Logo
Home>NETGEAR>Wireless Router>Nighthawk AX8

NETGEAR Nighthawk AX8 User Manual

NETGEAR Nighthawk AX8
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
Try quitting the browser and launching it again.
Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are
using Internet Explorer, click the Refresh button to be sure that the Java applet is
loaded.
Make sure that the IP address of your computer or mobile device is in the same
subnet as the router. If you are using the recommended addressing scheme, the IP
address of your computer or mobile device is in the range of 192.168.1.2 to
192.168.1.254.
If the IP address of your computer or mobile device is shown as 169.254.x.x, the
computer or mobile device could not reach the router’s DHCP server and the
Windows or Mac operating system generated and assigned an IP address. Such an
autogenerated IP address is in the range of 169.254.x.x. If your IP address is in this
range, check the connection from the computer or mobile device to the router, and
reboot your computer or mobile device.
If your router’s IP address was changed and you do not know the current IP address,
clear the router’s configuration to factory defaults. This sets the router’s IP address
to 192.168.1.1.
Tip: If the router is in access point mode or bridge mode and you do not know the
IP address that is assigned to it, first try to use an IP scanner application to detect
the IP address. (IP scanner applications are available online free of charge.) If you
can detect the IP address, you don’t need to reset the router to factory default
settings.
If you are attempting to set up your NETGEAR router as a replacement for an ADSL
gateway in your network, the router cannot perform many gateway services. For
example, the router cannot convert ADSL or cable data into Ethernet networking
information. NETGEAR does not support such a configuration.
You cannot access the Internet
If you can access your router but not the Internet, check to see if the router can obtain
a WAN IP address from your Internet service provider (ISP). Unless your ISP provides a
fixed IP address, your router requests an IP address from the ISP. You can determine
whether the request was successful using the router web interface.
To check the WAN IP address:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Select an external site such as https://www.netgear.com/.
User Manual166Troubleshooting
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router

Table of Contents

Other manuals for NETGEAR Nighthawk AX8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AX8 and is the answer not in the manual?

NETGEAR Nighthawk AX8 Specifications

General IconGeneral
Modulation1024-QAM
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channel bandwidth160 MHz
Top Wi-Fi standardWi-Fi 6 (802.11ax)
WLAN data transfer rate (max)6000 Mbit/s
WLAN data transfer rate (first band)1200 Mbit/s
WLAN data transfer rate (second band)4800 Mbit/s
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Memory card slot(s)No
Ethernet LAN (RJ-45) ports5
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
WAN connection typeRJ-45
Processor cores4
Processor frequency1800 MHz
Electromagnetic compatibilityFCC 15 B EN 55022 (CISPR 22), B C-Tick N10947
Security algorithms128-bit AES, WPA, WPA2, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, WAN
Output current3.16 A
Output voltage19 V
Power source typeAC
AC input frequency50 - 60 Hz
Package depth307 mm
Package width238 mm
Package height129 mm
Package weight2380 g
Number of products included1 pc(s)
Cables includedLAN (RJ-45)
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Routing protocolsRIP-1, RIP-2
Data link protocolsTCP/IP, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, SMB
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth202 mm
Width305 mm
Height161 mm
Weight1281 g

Related product manuals