NETGEAR Nighthawk X10 R9000 User Manual

2
WiFi Network Name and Password
The preassigned WiFi network name (SSID) and network key (password)
are unique to your router, like a serial number. Because the router
automatically uses WiFi security, you don’t need to set it up. The WiFi
settings are on the router’s label.
We recommend that you use the preassigned WiFi settings because you
can check the label if you forget them. You can log in to the router to
change these settings. If you do so, write down the new WiFi settings
and store them in a safe place.
You can write the WiFi settings from the label on your router in this
space for easy reference. If you change the WiFi settings, write the new
settings here for easy reference and store this booklet in a safe place.
WiFi network name (SSID):
Network key (password):

NETGEAR Nighthawk X10 R9000 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 60 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11ad
Top Wi-Fi standard	802.11ad
WLAN data transfer rate (max)	4600 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
WLAN data transfer rate (second band)	1733 Mbit/s
Product type	Tabletop router
Product color	Black
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac, IEEE 802.11ad
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Processor cores	4
Processor frequency	1700 MHz
Memory card slot(s)	-
Ethernet LAN (RJ-45) ports	6
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Power source type	DC
Cables included	LAN (RJ-45)
Security algorithms	WPA, WPA2, WPA2-PSK
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Supported network protocols	IPv6

Weight and Dimensions

Depth	168 mm
Width	224 mm
Height	74 mm
Weight	1865 g