NETGEAR Nighthawk X10 R9000 User Manual

9
¾ To access the USB storage device from a Mac:
1. Connect your USB storage device to a USB port on the router.
It might take up to two minutes before the USB storage device is
ready for sharing.
2. On a Mac that is connected to the network, launch Finder and
select Go > Connect to Server.
The Connect to server window opens.
3. Enter the smb://readyshare in the Server Address field and click
the Connect button.
4. When prompted, select the Guest radio button.
5. If you set up access control on the router and you allowed your Mac
to access the network, select the Registered User radio button
and enter admin for the name and password for the password.
For more information about access control, see the user manual,
which is available online at downloadcenter.netgear.com or through
a link in the router’s user interface.
6. Click the Connect button.
A window displays the files and folders on the device.

NETGEAR Nighthawk X10 R9000 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 60 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11ad
Top Wi-Fi standard	802.11ad
WLAN data transfer rate (max)	4600 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
WLAN data transfer rate (second band)	1733 Mbit/s
Product type	Tabletop router
Product color	Black
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac, IEEE 802.11ad
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Processor cores	4
Processor frequency	1700 MHz
Memory card slot(s)	-
Ethernet LAN (RJ-45) ports	6
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Power source type	DC
Cables included	LAN (RJ-45)
Security algorithms	WPA, WPA2, WPA2-PSK
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Supported network protocols	IPv6

Weight and Dimensions

Depth	168 mm
Width	224 mm
Height	74 mm
Weight	1865 g