NETGEAR Nighthawk X10 R9000 User Manual

3
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your router’s
WiFi network and type its password.
Join the WiFi Network Using WPS
For help with the WPS button on your WiFi-enabled computer or
mobile device, check the instructions or online help that came with that
computer or device. Some older equipment cannot use WPS.
¾ To join the network using WPS:
1. Press the WPS button on the router for three to five seconds.
The WPS LED on the button blinks.
2. Within two minutes, on your WiFi-enabled computer or other
mobile device, press its WPS button or click its on-screen WPS
button.
The WPS LED lights solid blue when the computer or mobile device
connects to your router.
3. Repeat this process to add other computers or mobile devices.

NETGEAR Nighthawk X10 R9000 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 60 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11ad
Top Wi-Fi standard	802.11ad
WLAN data transfer rate (max)	4600 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
WLAN data transfer rate (second band)	1733 Mbit/s
Product type	Tabletop router
Product color	Black
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac, IEEE 802.11ad
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Processor cores	4
Processor frequency	1700 MHz
Memory card slot(s)	-
Ethernet LAN (RJ-45) ports	6
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Power source type	DC
Cables included	LAN (RJ-45)
Security algorithms	WPA, WPA2, WPA2-PSK
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Supported network protocols	IPv6

Weight and Dimensions

Depth	168 mm
Width	224 mm
Height	74 mm
Weight	1865 g