NETGEAR Nighthawk X10 R9000 User Manual

6
Change the WiFi Network Name and Password
The router’s preset WiFi network name (SSID) and password are on the
router’s label. If you want to change your router’s WiFi network name
and password, log in to the router.
¾ To change the router’s WiFi network name and
password:
1. Launch a web browser from a computer or mobile device that is
connected to the network and visit www.routerlogin.net.
A login window opens.
2. Enter the router admin user name and password.
The admin user name is admin. If you did not change the admin
password, the default password is password.
The BASIC Home page displays.
3. Select Wireless.
The Wireless Setup page displays.
4. To change the WiFi network name (SSID), enter a new name in the
Name (SSID) field.
5. To change the WiFi password, enter a new password in the
Password (Network Key) field.

NETGEAR Nighthawk X10 R9000 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 60 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11ad
Top Wi-Fi standard	802.11ad
WLAN data transfer rate (max)	4600 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
WLAN data transfer rate (second band)	1733 Mbit/s
Product type	Tabletop router
Product color	Black
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac, IEEE 802.11ad
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Processor cores	4
Processor frequency	1700 MHz
Memory card slot(s)	-
Ethernet LAN (RJ-45) ports	6
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Power source type	DC
Cables included	LAN (RJ-45)
Security algorithms	WPA, WPA2, WPA2-PSK
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Supported network protocols	IPv6

Weight and Dimensions

Depth	168 mm
Width	224 mm
Height	74 mm
Weight	1865 g