New Holland C227 Operator's Manual

3-CONTROLSANDINSTRUMENTS
Liftarmandbucketcontrols
Handcontrols
93109347C1
Liftarmraiseandlowercontrol.
•
Theleft-handcontrollever(1)controlstheliftarm.The
liftarmwillraisebypivotingthehandle“UP”totheout-
sideofthecab.Pivotingthehandle“DOWN”tothein-
sideofthecabwilllowertheliftarm.
•
Theliftarmspoolisequippedwithadetented“FLOAT”
circuitiftheoperatorwantstheliftarmtooatover
changinggroundcontour.T oputthevalvein“FLOAT”
position,pivotthelefthandle“DOWN”untilaslight
“jump”isfelt.Inthisposition,thehandleislockedin
oatanddoesnotreturntotheneutralpositionunas-
sisted,butwilldosowhenlightpressureisappliedto
thehandletopivotit“UP”.
BT06H1862
Bucketdumpandcurlcontrol.
•
Therighthandcontrollever(2)controlsthebucket.The
bucketwilldumpbypivotingthehandle“UP”totheout-
sideofthecab.Pivotingthehandle“DOWN”tothein-
sideofthecabandthebucketwillrollback(curl).
NOTE:Thereisnodetentoroatpositiononthebucket
dumporcurlspools.
BT06H1873
3-10

New Holland C227 Specifications

General

Engine Power	74 hp
Engine Make	FPT
Peak Torque	232 lb-ft
Rated Operating Capacity	2, 700 lbs
Tipping Load	5400 lbs
Bucket Capacity	0.75 cu yd (0.57 m³)