New Holland C227 Operator's Manual

3-CONTROLSANDINSTRUMENTS
EnhancedHighFlow(EHF)auxiliaryhydraulics
TheEnhancedHighFlow(EHF)auxiliaryhydraulicfeatureprovides276bar(4000psi)or132l/min(35USgpm)
totheauxiliarycircuit.Followtheattachment’soperator’smanualonspecicinstallationprocedures,operation,and
removalprocedures.
NOTE:Theenhancedhighowsettingcanonlybeusedwithapprovedattachmentsandiscontrolledbyacircuit
interlockinstalledatthemultifunctionplugwiththeattachment.
Ifthemachineisequippedwiththeenhancedhighow
auxiliaryhydraulics,two5/8inchcouplersanda3/8inch
casedraincouplerblock(1)willbeattachedtotheright-
handloaderarm.
ThestandardauxiliaryhydraulicConnect-Under-Pres-
sure(CUP)valve(2)withtwo1/2inchportsandone3/8
inchcasedrainwillremainontheleft-handloaderarm.
NOTICE:Alwaysusethe5/8inchcouplersduringhigh
owoperationtopreventhighbackpressureandover-
heatingofthehydraulicsystem.
RCPH11SSL015BAD1
Beforeoperatingtheapprovedattachment,conrmthe
electricalconnection(1)issecuredinplace.Withoutcom-
pletionofthecircuitwithintheattachmentsideofthecon-
nector,onlystandardhighowcanbeachieved.
NOTE:AllapprovedEnhancedHighFlow(EHF)attach-
mentswillhaveanelectricalconnection.Thisprevents
operatingattachmentsthatarenotapprovedtohandle
276bar(4000psi)inHighPressure(HP)mode.
RCPH11SSL016BAD2
UsethethreepositionswitchonthelefthandROPSpost
toactivatethehighowoption.
•
Position(1)—HFHighFlowisactivated
•
Position(2)—Neutralorstandardow
•
Position(3)—HPHighPressureisactivated
NOTICE:Thehighowswitchmustbeturnedtotheneu-
tralpositionwhennotinuseorrequired.Overheatingof
thehydraulicoilorpoorattachmentoperationmayoccur.
Usethenumber2cylinderbuttonontheleft-handcon-
trollevertooperatetheenhancedhighowattachments.
Refertoyourcontrolleverswitchcongurations3-23for
moredetails.
RCPH11SSL003AAD3
3-33

New Holland C227 Specifications

General

Engine Power	74 hp
Engine Make	FPT
Peak Torque	232 lb-ft
Rated Operating Capacity	2, 700 lbs
Tipping Load	5400 lbs
Bucket Capacity	0.75 cu yd (0.57 m³)