Adjust the heat pump
Overview
Sub-menus
WLPH GDWH
0< 6<67(0
ODQJXDJH
KROLGD\ VHWWLQJ
DGYDQFHG
6ZHGLVK
DXWRRSHUDWLQJ PRGH
RII
For the menu MY SYSTEM there are
several sub-menus. Status information
for the relevant menu can be found
on the display to the right of the
menus.
operating mode Activation of
manual or automatic operating mode.
The status information shows the se-
lected operating mode.
time & date Setting current time and
date. Status information displays the
time.
language Select the language for the display here. The status information
shows the selected language.
holiday setting Vacation scheduling hot water and ventilation. Status
information "set" is displayed if you set a vacation schedule but it is not
active at the moment, "active" is displayed if any part of the vacation
schedule is active, otherwise it displays " off".
alarm Alarms can be reset here.
advanced Resetting all settings to factory default values.
operating mode
DXWR
DGG KHDW RQO\
RSHUDWLQJ PRGH
operating mode
Setting range: auto, add. heat only
Default value: auto
Menu
4.2
The heat pump operating mode is usually set to "auto". It is also possible
to set the heat pump to "add. heat only", but only when additional heat
is used.
Change the operating mode by marking the desired mode and pressing
the OK button.
NIBE™ F110Chapter 3 | F110 – at your service28
To Next Page
Loading...
Need help?
General
