4 Disturbances in comfort
In most cases, the heat pump notes operational interference (operational
interference can lead to disturbance in hot water comfort) and indicates
this with an alarm in the display.
Info-menu
All these measurement values are stored under menu 3.1 in the heat pump
menu system. Looking through the values in this menu can often simplify
finding the fault source.
Manage alarm
DODUP
FKDUJH SXPS
DLG PRGH
UHVHW DODUP
QR \HV
In the event of an alarm, a malfunction has occurred, which is indicated
by an alarm symbol in the display.
Alarm
In the event of an alarm a malfunction has occurred that F110 cannot
rectify itself. The display shows what type of alarm it is and lets you reset
the alarm. You can also choose to set the heat pump to rescue mode
reset alarm In most cases it is enough to select "reset alarm" to correct
the problem that caused the alarm. If the alarm recurs the problem that
caused the alarm remains. If the alarm disappears and then returns, contact
your installer.
aid mode "aid mode” is a type of emergency mode. This means that the
heat pump produces hot water despite there being some kind of problem.
This can mean that the heat pump's compressor is not running. In this case
the immersion heater produces hot water.
NIBE™ F110Chapter 4 | Disturbances in comfort32
To Next Page
Loading...
Need help?
General
