EN
2 – English
1
PRODUCT DESCRIPTION AND INTENDED USE
This product belongs to the SWN-SDN-SDNI families of gear motors,
intended for the automation of balanced doors: sectional doors for in-
dustrial use.
,NCDKR26-*426-*$26-$2#-
*$2#-*42#-*$2#-
$2#-$2#-*42#-*$2#-
*$2#-(*4RNMNCNS@SHCH
– absolute encoder (the positions are set through the control unit)
or
– mechanical limit switch (the positions are set by manually adjusting
the cams).
:$51,1*t$OOXVHVRWKHUWKDQWKRVHGHVFULEHGDQGLQHQYL-
URQPHQWDOFRQGLWLRQVRWKHUWKDQWKRVHVSHFLƄHGLQWKLVPDQXDO
DUHFRQVLGHUHGLPSURSHUDQGDUHSURKLELWHG
CONTENTS
GENERAL WARNINGS:
2 %$38(-23 ++ 3(.-42$
1 - PRODUCT DESCRIPTION AND INTENDED USE 2
2 - PRODUCT APPLICATION LIMITS 2
3 - INSTALLATION AND ELECTRICAL CONNECTIONS 4
3.1 - Gear motor installation 4
3.2 - Electrical connections 7
"Q@MJNODQ@SDCDLDQFDMBXL@MT@KCDUHBD*4
+HFGSBG@HMNODQ@SDCDLDQFDMBXL@MT@KCDUHBD*$*$+
"G@HMNODQ@SDCDLDQFDMBXL@MT@KCDUHBD*$
3.6 - Emergency manual device chain length adjustment 11
3.7 - Mechanical limit stop adjustment 12
3.8 - Mechanical limit stop connections 13
$KDBSQNMHBKHLHSRVHSBGBNMMDBSHNMR
4 - TESTING AND COMMISSIONING 15
4.1 - Testing 15
4.2 - Commissioning 15
5 - FURTHER DETAILS
5.1 - Static braking torque 15
7 - PRODUCT DISPOSAL 16
7 - BASIC TROUBLESHOOTING... 16
8 - TECHNICAL SPECIFICATIONS 16
Product data sheets 17-28
User manual (to be consigned to the end user)
CE DECLARATION OF CONFORMITY I
2
PRODUCT APPLICATION LIMITS
Before installing the product, make sure it is suitable for the intended
TRD RDD SGD OQNCTBSSDBGMHB@KRODBHjB@SHNMRBG@OSDQ8 - Technical
RODBHjB@SHNMR
:$51,1*t7KHPRGHORIJHDUPRWRUPXVWEHFKRVHQEDVHG
on the total weight that the motor needs to lift, the winding reel,
the thickness of the wall/sheet and any friction the latter cre-
ates against the structure of the door/shutter.
To Next Page
Loading...
Need help?
General
