44
Viewing Pictures on TV
Using the EG-CP11 video cable included with your camera, you can connect
the camera to a television or video-cassette recorder (VCR).
Choosing a Video Mode
The Video mode item in the camera setup menu offers a choice of NTSC
and PAL standards (
80). Be sure that the standard selected matches that
used in the device.
1
Turn the camera off
Turn the camera off before connecting or
disconnecting the video cable.
2
Connect the video cable
Open the interface cover and insert the black
plug into the camera’s interface connector,
the yellow plug into the video-in jack on the
television or VCR.
3
Tune the television to the video channel
If in doubt, consult the documentation for
your television or VCR.
4
Turn the camera on
Press the button for about a second to
turn the camera on. The camera monitor
will remain off and the television will display
the image normally shown in the monitor. If
the camera is connected to a VCR, images
can be recorded to video tape.
To Next Page
Loading...
Need help?
General
