88
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera and Printer
1 Turn off the camera.
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 Turn on the camera.
• When connected correctly, the PictBridge startup
screen (1) is displayed in the camera monitor. Then
the Print selection screen is displayed (2).
15/05
2010
NO. 12
Print selection
[ 12]
12
B Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an
angle.
To Next Page
Loading...
Need help?
General
