12
The Basics of Shooting and Playback
1 Prepare the included Charging AC Adapter.
• If a plug adapter* is included with your camera, attach the plug adapter
to the plug on the Charging AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the two are connected, attempting
to forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or
region in which the camera was purchased. This step can be omitted if
the plug adapter comes permanently bonded to the Charging AC
Adapter.
2 Make sure the battery is installed in the camera, and then connect the
camera to the Charging AC Adapter in order of
1
to
3
.
• Keep the camera turned off.
• Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an
angle when connecting or disconnecting them.
• The charge lamp slowly flashes green to indicate that the battery is charging.
• Shooting is not possible while the camera is connected to the Charging AC Adapter.
Preparation 2 Charge the Battery
USB cable
(included)
Electrical
outlet
Charge lamp
To Next Page
Loading...
Need help?
General
