Nikon D200 User Manual

Activating the
Onboard Flash
Unlike some of Nikon’s other dSLR models
that have the capability of activating the
electronic flash (and popping it up from its
retracted position automatically) when the
camera detects low light levels suitable for
flash photography, you must always activate
the D200’s flash unit manually. Pop up the
flash by pressing the flash button on the left
side of the camera.
Chapter 4 contains more infor-
mation using flash.
If you’re using Program, Shutter Priority,
Aperture Priority, or Manual modes, hold
down the flash button and spin the main
command dial to switch among:
✦ Front-curtain sync. The flash fires
as soon as the shutter opens. Set
the shutter speed of your choice
(generally up to 1/250 second)
when using Manual or Shutter
Priority modes. In Program and
Aperture Priority modes, the D200
sets the shutter speed between
1/60 and 1/250 second.
✦ Red-eye reduction. Triggers the
front-panel lamp (also used for
focus assist) 1 second prior to
exposure to reduce the red-eye
effect.
✦ Slow sync. Uses slow shutter
speeds (as long as 30 seconds) to
add background illumination to the
flash exposure. It is not available
with Shutter Priority or Manual
modes.
✦ Slow sync with red-eye. Adds
red-eye reduction to slow sync
mode.
✦ Rear-curtain sync. The flash is
delayed until just before the shut-
ter closes. This
records the flash
image after any
“ghost” images
from the ambi-
ent light caused
by moving
objects so the
ghost images
seem to “trail”
the flash image.
In certain modes, such as
Program mode, the camera’s
viewfinder will signal the user
with an icon when flash is sug-
gested so that the user can
press the flash button to raise
the flash head.
Metering Modes
The D200 can use any of three different
exposure metering methods when it’s set to
any of the semi-automatic or Manual expo-
sure modes (which I discuss later in the
chapter). Select the metering mode by turn-
ing the metering selector dial to the right of
the viewfinder eyepiece:
✦ Matrix. The camera examines
1,005 pixels in the frame and
chooses the exposure based on
that information (plus, with Type G
and D lenses, distance range data).
Tip
32 Part I ✦ Using the Nikon D200
1.19 Flash options.
06_037482 ch01.qxp 9/18/06 1:38 PM Page 32

Nikon D200 Specifications

General

Display diagonal	2.5 \
Vari-angle LCD display	No
Display resolution (numeric)	230000 pixels
Megapixel	10.2 MP
Camera type	SLR Camera Body
Sensor type	CCD
Sensor format	DX
Total megapixels	10.92 MP
Image sensor size	- \
Image formats supported	JPG, RAW
Maximum image resolution	3872 x 2592 pixels
Image sensor size (W x H)	23.6 x 15.8 mm
Still image resolution(s)	3872 x 2592, 2896 x 1944, 1936 x 1296
Mounting type	Bayonet
Lens mount interface	Nikon F
Magnification	0.94 x
Viewfinder type	Optical
PictBridge	Yes
USB version	2.0
Product color	Black
Battery type	EN-EL3e
Number of batteries supported	1
Flash modes	Red-eye reduction, Slow synchronization
Flash sync-speed	1/250 s
Flash range (wide)	- m
Compatible memory cards	CF, MicroDrive
Eye relief	19.5 mm
Scene modes	Portrait
Photo effects	Vivid
White balance	-
Self-timer delay	2, 5, 10, 20 s
Camera file system	DCF 2.0, DPOF
Diopter adjustment (D-D)	-2 - 1
Focus adjustment	Auto
Auto Focus (AF) points	11
Auto focusing (AF) modes	Continuous Auto Focus, Multi Point Auto Focus, Single Auto Focus
Light metering	Centre-weighted, Matrix, Spot
Light exposure modes	Aperture priority AE, Auto, Manual, Shutter priority AE
ISO sensitivity (max)	1600
ISO sensitivity (min)	100
Camera shutter type	Electronic
Camera shutter interval	0.5 s
Fastest camera shutter speed	1/8000 s
Slowest camera shutter speed	30 s
HD type	Not supported
Maximum video resolution	- pixels

Weight and Dimensions

Depth	74 mm
Width	147 mm
Height	113 mm
Weight	830 g