.SETUP. VI Basic Operations
1 Preparations Before Photographing
- 26 -
1.4
Initial Settings
When using the DS-L1 for the first time after purchasing, you must make the following
environment settings before photographing any image.
(1) Date and power-save settings
Set the unit clock and power-save timer.
(2) Image file-save related settings
Set an image file format and compression rate, the folder and file names in which to save
the file, and the source (photographing mode). Also make settings for entering camera
information or comments and for saving a log file at the same time.
(3) Startup condition settings
Set startup conditions for photography and display states.
To make these settings, display a menu and select the [SETUP] tag to enter the SETUP menu.
The correct procedures are detailed below.
1.4.1 Date and Power-save Settings—Additional Settings
Display a menu and select the [SETUP] tag to enter the SETUP menu. Select Additional...
from the SETUP menu to display the Additional Settings screen shown below.
When you have finished setting each item, press SAVE to save the data that has been set. Or
press Default to restore data to default values.
Sets date and time.
Sets power-save timer.
Sets mouse s
eed.
Sets electronic zoom
magnification.
Assigns CAPTURE
button function.
To Next Page
Loading...
Need help?
General
