2
CAUTION
WARNING
Warning and Caution Symbols Used in This Manual
Symbols Labeled on the Product
Though Nikon products are designed to provide you with utmost safety during use, incorrect usage or
disregard of the instructions may cause personal injury or property damage. For your own safety, read the
instruction manual carefully and thoroughly before using the product. Do not discard this manual. Always
keep it near the product for easy reference.
Inside this instruction manual, safety instructions are indicated with the symbols shown below. Be sure to
follow the instructions marked with these symbols for your safety.
Symbol Meaning
Disregarding instructions marked with this symbol may lead to death or
serious injury.
Disregarding instructions marked with this symbol may lead to injury or
property damage.
Symbol Meaning
Caution! Hot surface
This symbol label attached near the field lens unit (the lamp is set
underneath the field lens unit) and on the bottom surface of the base plate
(the lamp is set above this place) reminds you of the following.
WARNING: Risk of burn injury. The lamp and its surroundings (including
the field lens unit) become hot during use. Do not touch them
while the lamp is on and for thirty minutes after the lamp is
turned off.
CAUTION: The lamp and its surroundings remain hot even after the lamp
is turned off. Make sure that they are sufficiently cool before
replacing the lamp.
Caution!
This symbol label attached near the AC inlet reminds you of the following.
CAUTION: Make sure that the input voltage set by the voltage selector
matches the voltage provided in your region.
The voltage selector on the microscope sent to the United
States is set to “120V” at the factory.
To Next Page
Loading...
Need help?
General
